Ensure you check if your Extender is broadcasting its SSID so that you can resolve any Problem related to the internet, or you can update your Netgear firmware. Factory reset your resender and ensure your Wi-Fi Setting is Adjusted. Resetting should be the last option.

What is Netgear Extender?

A Wi-Fi Extender is a Gadget used to Boost the Wi-Fi Network. You can use the Wi-Fi Extender to extend your Wi-Fi Connection to your home or Workplace devices in dead Zones. Netgear Offers a selection of Wi-Fi Extenders. Netgear Wi-Fi Extender can Duplicate your existing Wi-Fi Network and broadcast it to relevant places for your devices to connect.

Why your Netgear Wi-Fi extender may not show up?

If your Wi-Fi extender is inactive or not Connected to a reliable source, it will not appear on the Network list.

The reasons are;

Using the weak signal.

If your Netgear Wi-Fi Extender is not Well Connected to the Router, there will be a weak Network connection.

 Distance between your Router and your Netgear Extender.

The signal will Clash if the distance between your Wi-Fi Extender and the Router is too close. If the distance between your Wi-Fi extender and your Router is too far, There might be Obstructions between the two. The block can interfere with your signal.

Use faulty, corrupted, or outdated firmware.

Some Network features are supported if you are using outdated firmware, which will make your DeviceDevice not show on the Network list.

The Network is partially installed.

When you are installing your Network, if you do not enter the Correct Credentials and address provided by the ISP, your Network will not be able to Recognize the Extender.

Power issues.

If you do not connect your Netgear Wi-Fi Extender to a reliable power source, it can be stuck on the restart loop and not show on the Network list.

Issues Within the Receiver Device.

If your older receiver device had issues, the new DeviceDevice Might not appear on the Network list.

Disabled SSID.

If your SSID broadcast or the channel on your Wi-Fi setup is overloaded, your Network list will not appear on the Extender.

How to Fix the Problems of Your Netgear Wi-Fi Extender?

The first thing you can do if your Netgear Wi-Fi Extender is not showing up in the Network list is to troubleshoot your receiver device. If troubleshooting does not work, then try the methods below:

Access a stable and strong Network connection.

A Weak Network signal will make your Netgear Wi-Fi Extender not show up. Connect to a fast Internet Connection. You can contact the service provider if you cannot resolve your Network speed.

Update firmware of your Netgear Extender.

If your firmware is not updated, some Network features will not be supported, making your devices start buffering. To update your Extender, log in to your DeviceDevice and click on the firmware update option; then, choose your model number range Extender.

Maintain a Reasonable Distance between your Router and Netgear Wi-Fi Extender.

Your Router and Extender should not stick to each other; if they are stuck, there might be Signal clashes. Also, ensure your Router and your Extender are not very far apart and are free from Obstructions that may block Signal transmission. Ensure the distance between the two is appropriate.

You are troubleshooting your Netgear Wi-Fi Extender installation.

Ensure you inspect your Extender’s Hardware installation.

Steps to troubleshoot your Extender:

Appliances like Bluetooth speakers, baby monitors, and microwave ovens can create interferences; hence you must keep them away. Change the channel numbers from your Router’s settings so that several Wi-Fi devices do not run on your Extender. Ensure there is enough Power Supply. Always change your SSID name and password for security reasons. Reset your Extender to fix all bugs. Ensure you cross-check your password while login in to avoid errors.

Troubleshooting Poor Connections.

You should test your internet connection before targeting your Extender.

Connect your Router directly to the PC using an Ethernet cable. You can also: 

Remove all data/reset your internet connection. Unplug all wires and plug them back. Remove Any Substance that can cause Obstructions.

Factory reset your Netgear Wi-Fi extender.

You can factory reset your Extender if the above methods do not work. Factory reset will delete all corrupted data and prevent your Extender from being scanned.

Conclusion

If you want to resolve the problem of your Netgear extender being unable to appear in the Network list, you should try troubleshooting then Factory reset the Extender. You can troubleshoot or factory reset your devices and Router at home or anywhere you use them. You can contact Netgear for help if the above methods don’t work for you.